Customizable 4G/5G drone omnidirectional detection system

The drone monitoring device is an innovative drone monitoring device. This product can monitor the remote identification information (RemotelD, referred to as RID) actively broadcast by drones. A single device can display the serial number (SN), model, location (drone and pilot), flight speed, altitude, take-off point and other multi-dimensional information of drones within the supervision scope in real time. The device is easy to deploy and has strong scalability. It can meet the target drone supervision in scenarios such as airports, high-speed railways, power parks, transportation hubs, and important event security.

1. Target Positioning Real-time display of the current position and flight trajectory of the drone
2. Pilot Positioning Real-time positioning and display of the current position of the pilot
3. Multi-target Monitoring Simultaneous monitoring of the flight trajectories of multiple targets (≥10 sorties)
4. Multi-model supervision Can monitor and locate more than 300 models
5. Detection and strike linkage Can link countermeasures or decoy equipment to deal with non-cooperative targets
6. Networking Supports large-scale deployment of multiple devices, and networking deployment with TDOA detection and positioning equipment
7. Transmission mode Supports Bluetooth 4,Bluetooth 5, WiFi Beacon, WiFi NAN transmission mode
8. Supported standards GB 42590-2023, ASTM F3411 Remote ID, ASD-STAN prEN 4709-002

1. Multi-layered Protection Design
   Precision equipment (e.g., radar antennas, detection systems): Employs a multi-layered structure consisting of "cargo-filler-inner packaging-cushioning layer-outer packaging". The inner packaging is wrapped with anti-static foam or air-filled bags, while the outer packaging consists of reinforced wooden crates or aerospace-grade containers.
   
   Moisture-proofing: The inner walls of the outer packaging are lined with moisture-proof material, and seams are sealed to withstand the high humidity environment during sea transport.
2. Cushioning and Shock Absorption
   Fragile components (e.g., radar displays, optical lenses) are packaged using suspended packaging or anti-reverse design. Glass components must be completely wrapped with corrugated cardboard and foam.
3. Electronic Components
   High-frequency components (e.g., waveguides) must be cleaned and covered with dustproof end caps, then sealed with moisture-proof paper.
   
   Battery-powered devices (e.g., drone batteries, walkie-talkie batteries) are packaged separately with a dedicated battery label on the outer box.
4. Large Equipment Packaging Solutions
   Radar mount/drone mounting platform: A wooden sleeper or steel base is added to the bottom.